Seasoning Your Grill - Traeger TFB42PLF Owner's Manual

SEASONING YOUR GRILL

TO BE USED ON INITIAL FIRING ONLY.
auger by allowing the auger tube to be "charged" with pellets.
1
High
OFF
ON
PLUG APPEARANCE MAY VARY BY REGION.
With the Main Power switch in the OFF (O) position, plug
the power cord into an appropriate grounded/earthed
electrical outlet.
3
High
OFF
ON
Turn grill on: Flip the Main Power switch to ON (I) and
turn the temperature dial to SMOKE. Make sure the auger
is turning (inside the pellet hopper).
In order to ensure proper operation of the grill, you must first prime the
375
Probe
Selector
375
Temperature
˚F
275
250
225
Probe
Selector
180
Smoke
Shut Down Cycle High
OFF
2
Fill the hopper with TRAEGER® BRAND HARDWOOD
PELLETS.
HARDWOOD PELLETS, which are specifically made to
work in our grills. Never use heating fuel pellets in
the grill.
4
300
325
350
375
Probe
Selector
Check that there is air movement from the draft inducer
fan by placing your fingers over the firepot. If the hot rod
is getting hot, it will turn red.
10
WARNING!
Use ONLY TRAEGER® BRAND
Probe 1
CAUTION!
Do not touch the hot rod.
Temperature
˚F
275
250 300
225 325
180 350
Smoke
375
Shut Down Cycle High
OFF
Probe
Selector
ON