Seasoning Your Grill - Traeger Pro Series Owner's Manual

SEASONING YOUR GRILL

TO BE USED ON INITIAL FIRING ONLY.
first, to prime the auger ("charge" the auger tube with pellets) and, second, to season your grill (run your grill at a high temperature).
1
Probe 1
Probe
Selector
Probe 2
Remove the grill grates, grease drip tray, and heat baffle
from the inside of the grill.
3
Open the hopper lid. Make sure there are no foreign
objects in the auger before adding pellets to the hopper.
After adding pellets to the hopper, close the hopper lid.
We recommend you fill the hopper with pellets at least
to the safety grate in the hopper.
WARNING!
DO NOT USE FUEL PELLETS. Never
use heating fuel pellets in the grill because they may
contain hazardous contaminants and additives and
may damage the grill.
In order to ensure proper and safe operation of the grill, follow the instructions below
2
Shut Down
Cycle
Power
PLUG APPEARANCE MAY VARY BY REGION.
(GFCI) protection must be provided on the circuit
or outlet used to power the grill.
With the main power switch on the back of the grill hopper
in the OFF (O) position, plug the power cord into an
appropriate grounded/earthed GFCI electrical outlet.
4
Prob e 1
Prob e 2
Turn grill on: Flip the main power switch to ON (I) and turn
the temperature dial to SMOKE. Look inside the firepot to
make sure the auger is turning (inside the pellet hopper).
13
375
High
OFF
ON
WARNING!
Ground Fault Circuit Interrupter
Probe
Selec tor
Probe 1
Probe 2
Probe
Selector
TRAEGER.COM