Seasoning Your Grill - Traeger TFB89BLF Owner's Manual

SEASONING YOUR GRILL

TO BE USED ON INITIAL FIRING ONLY.
auger by allowing the auger tube to be "charged" with pellets.
1
PLUG APPEARANCE MAY VARY BY REGION.
With the Main Power switch in the OFF (O) position, plug
the power cord into an appropriate grounded/earthed
electrical outlet.
3
Press the Standby button to wake the grill. Press MENU
to display the main menu. Turn the dial to select AUGER,
then select Prime Auger.
The auger tube will take a few minutes to fill with pellets
and begin dispensing into the firepot. Your grill display will
tell you the specific time. Once pellets begin to fall into the
firepot, select Done to turn off the auger. You only need a
few pellets in the firepot to season your grill.
6236 Ironwood OM EN GLOBAL v01.indd 11
In order to ensure proper operation of the grill, you must first prime the
AUGER
>Prime Auger
>Clear Auger Jam
>Back
Press Dial To Set Temp
2
Fill the hopper with TRAEGER BRAND HARDWOOD
PELLETS.
WARNING!
Use ONLY TRAEGER BRAND
HARDWOOD PELLETS, which are specifically made
to work in our grills. Never use heating fuel pellets in
the grill.
4
350
°F
Press dial
to set temp
The home screen will display "Press dial to set temp." Turn
the Selection dial clockwise to 177°C (350°F) and press
the dial. Next, press IGNITE, close grill door, and run grill
for 20 minutes once it has reached the set temperature.
350
°F
NOTE:
Whenever you're instructed to
Press Dial To Set Temp
select or confirm a menu option, turn
the Selection dial to the desired option and press the
center of the dial to lock in your selection.
11
TRAEGERGRILLS.COM
8/29/19 2:14 PM