Seasoning Your Grill - Traeger TFB89BLE Owner's Manual

SEASONING YOUR GRILL

TO BE USED ON INITIAL FIRING ONLY.
auger by allowing the auger tube to be "charged" with pellets.
1
PLUG APPEARANCE MAY VARY BY REGION.
With the Main Power switch in the OFF (O) position, plug
the power cord into an appropriate grounded/earthed
electrical outlet.
3
Press MENU to display the main menu. Turn the dial to
select AUGER, then select Prime Auger.
The auger tube should take approximately 2 minutes
to fill with pellets and begin dispensing into the firepot.
Once pellets begin to fall into the firepot, select Back
to turn off the auger. You only need a few pellets in the
firepot to season your grill.
4731 Ironwood_OM_ENv28.indd 11
In order to ensure proper operation of the grill, you must first prime the
AUGER
>Prime Auger
>Clear Auger Jam
>Back
Press Dial To Set Temp
2
Fill the hopper with TRAEGER® BRAND HARDWOOD
PELLETS.
WARNING!
Use ONLY TRAEGER® BRAND
HARDWOOD PELLETS, which are specifically made to
work in our grills. Never use heating fuel pellets in
the grill.
4
350
°F
Press dial
to set temp
The home screen will display "Press dial to set temp."
Turn the Selection dial clockwise to 350°F (177°C). Press
IGNITE, close grill door, and run grill for 20 minutes once
it has reached the set temperature.
350
°F
NOTE:
Whenever you're instructed to
Press Dial To Set Temp
select or confirm a menu option, turn
the Selection dial to the desired option and press the
center of the dial to lock in your selection.
11
TRAEGERGRILLS.COM
10/15/18 3:28 PM