Seasoning Your Grill - Traeger TFB01WLB Owner's Manual

SEASONING YOUR GRILL

To be used on initial firing only.
Your Timberline Grill has a Prime Auger function to prepare your grill for use. You will be
prompted to run this cycle on start-up.
1
Remove grates, grease drip tray, and
heat shields.
3
Make sure there are no foreign objects
in the auger before adding pellets to
the hopper.
12
66106_Timberline_UCG_v14.indd 12
Plug appearance may vary by region.
2
With the Main Power switch in the
OFF (O) position, plug the power cord
into an appropriate grounded/earthed
electrical outlet.
WARNING!
Use ONLY TRAEGER BRAND
HARDWOOD PELLETS, which are specifically
made to work in our grills. Never use heating
fuel pellets in the grill.
4
Turn grill on: Flip the Main Power switch
on the back of the grill to ON (I), and
then press the now-lit Standby button
on the front control panel to activate the
controller. After a few seconds, the home
screen will display.
NOTE: The seasoning reminder will display
the first few times you power up the grill.
However, you only have to season your
grill once.
SUPER
SMOKE
9/9/16 9:03 AM