Power Over Ethernet (Poe); Poe Compatibility; Power Classification - Ganz ZN-S1000VE Hardware Manual

ZN-S100V/ZN-S1000VE HARDWARE MANUAL

5. Power over Ethernet (PoE)

The PoE module used in ZN‐S100V/ZN‐S1000VE is commercially available module without
modification. The standard ZN‐S100V/ZN‐S1000VE does not include PoE module in it. PoE
module is included on the request of a customer. For the detailed information, please
contact sales person.

5.1. PoE compatibility

With non Power Sourcing Equipment (PSE)
When it is connected with non PSE, the power adaptor should be connected.
With power adaptor
Connecting both PSE and power adaptor does not do any harm to the products.
Disconnecting power adaptor while it is operating does not stop operation. The product
continues to work without rebooting.

5.2. Power classification

The PoE Power Class supported by ZN‐S100V/ZN‐S1000VE is Class 0. Table 1 shows IEEE
802.3af power classes.
Class Usage
0 Default
1 Optional
2 Optional
3 Optional
4 Reserved for Future Use
Table 1. IEEE 802.3af PSE and Powered Device Power Classifications
2010/2-1 D1A.02
Minimum Power Levels
Output at the PSE
15.4W
4.0W
7.0W
15.4W
Treat as Class 0
Maximum Power Levels at
the Powered Device
0.44 to 12.95W
0.44 to 3.84W
3.84 to 6.49W
6.49 to 12.95W
Reserved for Future Use
17