Table of Contents
Advertisement
Narrow hemming
The
rolled hemming foot
is
00
used to stitch the narrow rolled
hems usually found on shirt
3.5
1.5~3.0
K
tails, table linens and along the
edge of frills.
* The
rolled hemming foot
accessory is optional. It is not
included with this machine.
Fold edge of fabric over about
3mm (1/8 inch), then fold it over
again 3mm (1/8 inch) for about
5cm (2 inches) along the edge
of the fabric.
Insert the needle into the fold by
rotating the handwheel toward
you, and lower the presser foot.
Sew several stitches and raise
the presser foot.
Insert the fabric fold into the
spiral opening of
rolled hemming
foot
. Move fabric back and forth
until the fold forms a scroll shape.
Lower the presser foot and start
sewing slowly guiding the raw
edge of the fabric in front of the
rolled hemming foot
evenly into
the scroll of the foot.
47
Advertisement
Table of Contents
