Table of Contents
Advertisement
Button sewing
Change the presser foot to the
06
button sewing foot.
2.5~4.5
Move the drop feed control to
"
" to lower the feed dogs.
Position the work under the foot.
Place the button in the desired
position, lower the foot.
a
b
a a
b b
Select zig zag pattern. Adjust
the stitch width to "2.5-4.5"
according to the distance
2.5~4.5
between the two holes of the
button.
Turn the handwheel to check
that the needle goes cleanly
into the left and right holes of
the button.
Before sewing, press the Auto-
lock button to sew
reinforcement stitches
automatically at the beginning
and at the end of the stitch.
If a shank is required (ex. sew
on coats or jackets), place a
darning needle on top of the
button and sew.
Pull end of the upper thread to
the wrong side of the fabric,
then tie it with the bobbin
thread.
For buttons with 4 holes, sew
through the front two holes first,
push work forward and then
sew through the back two holes.
37
Advertisement
Table of Contents
