JLG E400A Narrow Operation And Safety Manual page 36

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
11. Swing Motor and Worm Gear - See Note.
12. Hydraulic Pump and Reservoir - Properly secured; no visible
damage or hydraulic leaks. Recommended hydraulic fluid
level on dipstick (system shut down, boom in stowed posi-
tion). Breather cap/dipstick secure and working.
13. Turntable Bearing - No loose or missing hardware; no visible
damage; evidence of proper lubrication. No loose bolts or
looseness between bearing and structure.
14. Battery Compartment Right Side - Batteries have proper
electrolyte level; cables tight; no visible damage or corro-
sion.
15. Cowling and Latches - See Note.
16. Battery Charger - See Note.
17. Brake/Steer Valve - See Note.
2-8
18. Boom/Upright - No visible damage; All pins properly
secured. Upright in vertical position. If Upright does not rest
on stop with machine in the stowed position, this indicates
upright is out of plumb.
19. Counterweight - See Note.
20. Tie Rod Ends and Steering Spindles - See Note. Tie rod end
stubs locked.
21. Manual Descent Valve - See Note.
22. Control Valve - See Note.
23. Frame - See Note.
24. Platform Pivot Pins - Properly secured.
25. SkyGuard (If Equipped) - See Inspection Note.
3121716