JLG E400A Narrow Operation And Safety Manual page 31

Type
Pre-Start Inspection Before using each day; or
whenever there's an Operator change.
Pre-Delivery Inspection (See Before each sale, lease, or rental delivery.
Note)
Frequent Inspection In service for 3 months or 150 hours, whichever comes first;
(See Note) or
Out of service for a period of more than 3 months; or
Purchased used.
Annual Machine Inspection Annually, no later than 13 months from the date of prior
(See Note) inspection.
Preventative Maintenance At intervals as specified in the Service and Maintenance
Manual.
NOTE: Inspection forms are available from JLG. Use the Service and Maintenance Manual to perform inspections.
3121716
SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
Table 2-1. Inspection and Maintenance Table
Frequency
Primary
Responsibility Qualification
User or Operator User or Operator
Owner, Dealer, or User Qualified JLG Mechanic
Owner, Dealer, or User Qualified JLG Mechanic
Owner, Dealer, or User Factory Trained
Service Technician
(Recommended)
Owner, Dealer, or User Qualified JLG Mechanic
Service
Reference
Operator and Safety Manual
Service and Maintenance Manual
and applicable JLG inspection form
Service and Maintenance Manual
and applicable JLG inspection form
Service and Maintenance Manual
and applicable JLG inspection form
Service and Maintenance Manual
2-3