Table of Contents
Advertisement
1
GENERAL WARNING
1.1
PLEASE READ BEFORE USING THIS MANUAL
•
This manual is part of the product and should be kept near the instrument for easy and quick reference.
•
The instrument shall not be used for purposes different from those described hereunder. It cannot be used
as a safety device.
•
Check the application limits before proceeding.
•
Dixell Srl reserves the right to change the composition of its products, even without notice, ensuring the
same and unchanged functionality.
1.2
SAFETY PRECAUTIONS
•
Check the supply voltage is correct before connecting the instrument.
•
Do not expose to water or moisture: use the controller only within the operating limits avoiding sudden
temperature changes with high atmospheric humidity to prevent formation of condensation
•
Warning: disconnect all electrical connections before any kind of maintenance.
•
The instrument must not be opened.
•
In case of failure or faulty operation send the instrument back to the distributor or to "Dixell S.r.l." with a
detailed description of the fault.
•
Consider the maximum current which can be applied to each relay (see Technical Data).
•
Ensure that the wires for probes, loads and the power supply are separated and far enough from each
other, without crossing or intertwining; do not use the same electrical conduit to install high voltage cabling
and low voltage cabling.
•
The ground connection of the secondary coil of the transformer that powers the device can result in a bad
performance; where possible, this connection should be avoided.
•
Fit the probe where it is not accessible by the end user.
•
In case of applications in industrial environments, the use of mains filters (our mod. FT1) in parallel with
inductive loads could be useful.
•
The
symbol alerts the user of non-insulated "dangerous voltage" within the product area that is
sufficiently high to constitute a risk of electric shock to persons.
•
The
symbol alerts the user of important operating and maintenance (assistance) instructions
found in the documentation attached to the device.
Separate the power supply of the device from the rest of the electrical devices connected
➢
inside the electrical panel.
1592022020 Quick reference guide iCHILL 100DEVO rel. 1.0
5/40
Advertisement
Table of Contents
