Connections; Connecting To A Tv With An Audio/Video Cables; And Rf Cable - Samsung BD-DT7800 User Manual

Connections

Connecting to a TV with an Audio/Video cables and RF cable
1. Connect the RF cable as shown.
2. Using video/audio cables, connect the VIDEO OUT (yellow) / AUDIO OUT (white and red)
terminals on the rear of the product to the VIDEO IN (yellow) / AUDIO IN (white and red) terminals
of your TV.
3. Plug in the product and TV.
4. Turn on the product and TV.
Red White Yellow
NOTE
✎
` The RF cable connection of this product sends only signals of TV. You must connect the Audio/Video cables to watch
output from your product.
` Noise may be generated if the audio cable is placed too close to the power cable.
` If you want to connect to an AV receiver, please refer to the AV receiver connection pages. (See pages 25~26)
` The number and position of terminals may vary depending on your TV set. Please refer to the user manual of your TV.
` If there is only one audio input terminal on the TV, connect it to the AUDIO OUT (right/white) terminal of the product.
To ANT IN
To TV
RF cable
To ANT INPUT
Audio/Video cable
21
English