Connect A Usb Device Before Using The Time Shift And Recorded Tv Functions; Copyright - Samsung BD-DT7800 User Manual

Smart pvr
Table of Contents

Advertisement

Getting Started
Music File Support
File
Container
Extension
*.mp3
MP3
*.wma
WMA
Connect a USB device before
using the Time shift and Recorded
TV functions
Do not use a USB memory
stick. We do not support a USB
memory stick.
We recommend using a USB
HDD with at least 5400 rpm, but
a USB HDD of RAID type is not
supported.
• To use the Time shift mode or the Recorded
TV function, a connected USB device must be
execute the Device Format function to proper
form for recording.
- During the device formatting, do not
disconnect the device while formatting is in
progress. If you format the device, all files will
be deleted.
- Before formatting your device to this product,
please back up your files to prevent them
from damage or loss of data. SAMSUNG is
not responsible for any data file damage or
data loss.
• Recorded videos are DRM (digital rights
managements) protected and cannot be played
on a PC or other product. Note that files saved
on the TV cannot be used after the main board
is changed.
14
English
Audio
Support Range
Codec
MP3
-
Compliant with
WMA version 10
* Sampling rates (in
kHz) - 8, 11, 16,
WMA
22, 32, 44.1, 48
* Bit rates - All bit-
rates in the range
5kbps to 384kbps
• If available storage is left less than 10MB during
the recording, recording is finished automatically.
• If the USB device has failed the Device
Performance Test, the USB device must
go through the Device Format and Device
Performance Test again before you record with
the Guide or Channel Manager.
If the device has failed the Performance Test, It
cannot be used for recording.
• For more information, see your user's manual.

Copyright

© 2011 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user's
manual may be reproduced or copied without the
prior written permission of Samsung Electronics
Co.,Ltd.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents