Table of Contents
Advertisement
Setup
One Foot Connection
You can set up the wireless connection
automatically if you have a Samsung Wireless
Router (CY-SWR1100) which supports One Foot
Connection. To connect using the One Foot
Connection function, follow these steps:
1. Press the ▲▼ buttons to select One Foot
Connection.
Settings
Network Settings
Display
Select a network connection type.
Audio
Channel
Network
Wired
System
Wireless
(general)
Language
Connect to the wireless network automatically if your
Security
WPS(PBC)
wireless router supports One Foot Connection. Select
this connection type after placing the wireless router
General
One Foot
within 10 inches (25 cm) of product.
Connection
Support
2. Press the ENTER button.
3. Place the Samsung Wireless Router
(CY-SWR1100) within 25 cm (10 inches) of
your product to connect.
4. Wait until the connection is automatically
established.
Network Status
Check whether a connection to the network and
the Internet have been established.
Settings
Network Status
Display
Audio
Channel
iptime
Network
System
Internet is connected successfully.
Language
If you have a problem using any Internet services, contact your Internet service
provider.
Security
General
Support
Network Settings
IP Settings
SWL(Samsung Wireless Link)
Mobile devices with Samsung Wireless Link
capability can be connected to your network via
this product.
• Off : Set Samsung Wireless Link off.
• On : Set Samsung Wireless Link On.
42
English
> Move " Enter ' Return
MAC Address
XX:XX:XX:XX:XX:XX
IP Address
0.0.0.0
Subnet Mask
0.0.0.0
Gateway
0.0.0.0
DNS Server
0.0.0.0
Retry
OK
< Move " Enter ' Return
1. If you select On, press the ▲▼ buttons to
select the Connect SWL, then press the
ENTER button. Please follow the instruction
on TV Screen.
NOTE
✎
` If this product turned off, the network connection
using SWL will be disconnected.
AllShare Server Management
Manage content sharing function. You can share
media contents (videos, music, photos) via the
AllShare function.
• AllShare Server : Set the server function.
• Change Server Name : Set the server name.
Enables you to identify the server on a network.
• Device Access Control : Configures access
authorization for individual device.
System
Plug & Play
By using Plug & Play, you can set country, clock
mode and Network Settings, etc.
For more information about the Plug & Play
function, refer to the Plug & Play section of this
user manual. (See pages 29~46)
NOTE
✎
` If you want to change plug & play options, you
should enter the password.
Clock
Set time-related functions.
• Clock Mode : You can set it to Auto or Manual.
• Clock Set : If Clock Mode set to Manual, the
this menu will be activated.
NOTE
✎
` If Timer Viewing and Timer Recording is set using
GUIDE, Channel List, or Info menu, It will work based
on the time information of the TV programme.
If you set the Clock Mode to Manual and change
time manually, Timer Viewing and Timer Recording
function can be limited or work abnormally.
Hide quick links:
Advertisement
Table of Contents
