Setting the Remote Control to
Operate Your TV
To determine whether your television is
compatible, follow the instructions below.
1. Turn your television on.
2. Point the remote control towards the
television.
3. Press the TV button to set the TV mode.
4. Press and hold the TV POWER button, and
then enter the two-figure code in the table
to the right that corresponds to the brand of
your television by pressing the appropriate
number buttons.
If your television is compatible with the remote
control, it will Turn off.
The remote is now programmed to operate
the TV.
NOTE
✎
` If several codes are listed for your television brand,
try each one in turn until you find one that works.
` If you replace the remote control’s batteries, you
must set the brand code again.
You can control certain functions of your TV with
this remote control.
Button
Function
TV POWER
Used to Turn the television on and off.
Number
Used to input number directly.
Used to adjust the volume of the
TV VOL +/–
television.
TV MUTE
Used to toggle the sound on and off.
PROG ( , / . )
Used to select the desired channel.
Used to select an external source
TV SOURCE
connected to the TV.