Case 2 : Connecting To A Tv With A Component Cable - Better Quality - Samsung BD-DT7800 User Manual

Case 2 : Connecting to a TV with a Component Cable - Better Quality

- You can connect the product to your TV using Component video cables.
- You will enjoy high quality images with accurate colour reproduction. Component video separates
the picture element into black and white (Y), blue (P
images. (Audio signals are delivered through the audio output.)
1. Using a Component video cable, connect the COMPONENT OUT terminals on the rear of the
product to the COMPONENT IN terminals of your TV.
2. Using audio cables, connect the AUDIO OUT (white and red) terminals on the rear of the product to
the AUDIO IN (white and red) terminals of your TV.
3. Turn on the product and TV.
4. Press the input selector on your TV remote control until the "COMPONENT" signal from the product
appears on the TV screen.
• If you have set the remote control to operate your TV (See pages 19~20), press the TV SOURCE
button on the remote control and select COMPONENT as the external source of the TV.
Red White Red Blue
NOTE
✎
` Depending on the manufacturer, the component terminals on your TV may be marked "R-Y, B-Y, Y " or "Cr, Cb, Y"
instead of "P , P , Y". The number and position of terminals may vary depending on the TV set.
B R
Please refer to the user manual of your TV.
` You can select from a variety of resolution settings as 1080i, 720p, 576p/480p or 576i/480i, depending on the
contents type. (See pages 33~34)
` The actual resolution may differ from the setting in the setup menu if you have connected both Component and HDMI
cables. The resolution may also be different depending on the contents type. (See pages 33~34)
B
Component cable
(not included)
Green
) and red (P ) signals to present clear and clean
R
Audio cable
23
English