Appendix B: At Commands; Terminology; At Command; At Response - Sena PARANI-SD1000 User Manual

Appendix B: AT Commands

B.1. Terminology
B.1.1. AT Command
AT command set is the
developed by H ayes
H T
provides the extended AT command set to control and configure the serial parameters and Bluetooth
connection.
B.1.2. AT Response
Parani-SD replies to AT commands with 4 kinds of message, 'OK', 'ERROR', 'CONNECT' and
'DISCONNECT'.
B.1.3. Operation Mode
Mode Description
Waiting for AT commands
Mode0
Attempting to connect the last connected Bluetooth device
Mode1
Waiting for the connection from the last connected Bluetooth device
Mode2
Waiting for the connection from any other Bluetooth device
Mode3
B.1.4. Operation Status
Status Description
Waiting for AT commands
Standby
Executing tasks
Pending
Transmitting data
Connect
B.1.5. Security

Security

Description
Pin Code (or Pass key)
Authentication
Data encryption
Encryption
i n fact standard l anguage
H T T H H T
and is recognized by virtually all
T H
for controlling m odems
T H H T
p ersonal computer
H T
35
. The AT command set was
T H
modems. Parani-SD
T H