Product Specification - Sena PARANI-SD1000 User Manual

1.3. Product Specification

Serial Interface
Bluetooth Interface
Configuration
Firmware Update
Diagnostic LED
Power
Battery
One female DB9 serial port for data communication
Serial UART speed up to 921.6kbps
CTS/RTS flow control, DTR/DSR for loop-back & full transfer
Bluetooth v2.0 + EDR
Profile: Serial Port Profile
Class 1
Working distance:
Stub Antenna
Stub Antenna
Dipole
Antenna
Dipole
Antenna
Dipole
Antenna
Dipole
Antenna
Dipole
Antenna
Patch
Antenna
ParaniWIN, Modem AT command set
ParaniUpdater
Mode, Connect, Serial Rx/Tx, Charge, Low battery
Supply voltage: 5V ~ 12V DC
Power consumption: 80mA@5VD Max
- Capacity
240 mAh(standard)
900 mAh(extended)
- Charging Power
Minium 5V/200mA
- Charging Time
Approximately 2 hours (standard)
Approximately 5 hours (extended)
- Battery life (Test based on 9600 bps data loopback. Actual battery life
varies by configuration, operating conditions and other factors)
Approximately 4.5 hours (standard)
Approximately 16.5 hours (extended)
Parani-SD1000
-
Stub Antenna
- Dipole
Antenna
- Dipole
Antenna
- Dipole
Antenna
- Patch
Antenna
- Dipole
Antenna
- Patch
Antenna
- Patch
Antenna
9
100 meters
150 meters
200 meters
300 meters
500 meters
400 meters
600 meters
1,000 meters