Advertisement
The screen shows 3 glittery number and "AUTO"if the power is on.
-
In order to set the correct time, press the
-
shows.
Manual operation setting
Press the
button to remove the flashing of "AUTO".
If " AUTO" is flashing (automatic or semi automatic program has been set),press
process is on.
Automatic setting (set the time of full automatic starting and ending)
1.Press
button, set roast time;
2.Press
button, set roast finish time;
3.Set temperatures and roast modes by turning the thermostat knob and selector knob.
After the above setting, "AUTO"will be glittering, which means the roast process of the oven is set.
For example: if roast time takes 45 minutes and expect it will end at 14:00.
Press,
the roast time is to be 45 minutes;
Press,
the roast is set to end at 14:00.
After the above setting, the screen shows the real time(hour、minute)and flashing"AUTO",it means the set roast process is memorized
automatically.
When the clock turns to be 13:15(or between 13:14-13:15), the oven will start automatically.
In the roast time,
and"AUTO"will be always flashing.
When the clock turns to be 14, the roast has been finished automatically. The alarm will ring and"AUTO" will flash, press the
and the ringing will stop.
Semi-automatic setting (set the time of automatic starting and ending)
A. Set the time limit of roast (10 hours maximum):
Press the
button to set the time of roast;
The oven starts immediately,
roast operation process will be shut automatically. Then " AUTO" flashes, the alarm rings. The ringing will stop after the
B. Set the time of ending (23 hours 59 minutes maximum):
Press the
button to set the time of ending;
The oven starts immediately,
Then"AUTO"flashes, the alarm rings. The ringing will stop after the
When the related button is pressed, the set roast process will be displayed. Whenever the
to "0",the set roast process will be cancelled. When
Timer
23 hours 59 minutes can be set as maximum.
To set the time, press the
(hour, minute) and the
button will show on the screen. When the
is reached,
disappears and the alarm will ring again. To stop the alarm, press the
Notice: After pressing the related button, setting is supposed to be done in 5 seconds. In case of blackout, the set process as well as the real
button first, then + or - button to carry forward or backward the figure until the exact time
and"AUTO"will flash. After the roast is finished, the
and"AUTO"will flash. When the set time of ending is reached, the roast process will shut automatically.
button, and then + or - button, until the required time is shown on the screen. After the setting, the correct time
button to remove "AUTO" and then the manual operation
button is Pressed.
button is pressed again, the oven will revert to the manual operation process.
button is pressed the time displaced will be seen. When the set time
button is pressed, and set backward the time
button.
button
button is pressed.
Advertisement
