Automatic Programmes - AEG BE7304151 User Manual

7.5 Setting the SET+GO
Set an oven function (or programme)
1.
and temperature (refer to "Setting
the oven function" and "Changing
the temperature").
2. Set the DURATION (refer to "Setting
the DURATION").
3.
Touch
flashes in the display.
4.
Touch
tion.
The display shows
indicator. This indicator shows which
clock function is activated.
5. Touch a sensor field (apart from
ON / OFF) to start the SET+GO
function.
You can use the SET+GO func-
tion only when the DURATION is
set.
7.6 Setting the MINUTE
MINDER
Use the MINUTE MINDER to set a
countdown (maximum 2 h 30 min). This
function has no effect on the operation
of the oven. You can set the MINUTE
MINDER at any time and also when the
appliance is off.

8. AUTOMATIC PROGRAMMES

WARNING!
Refer to the Safety chapters.
8.1 RECIPE MENU
The display shows the shelf posi-
tion and the default cooking
times for all automatic recipes.
There are 20 automatic pro-
grammes and recipes. Use an au-
tomatic programme or recipe
when you do not have the knowl-
edge or experience on how to
prepare a dish. You can find the
list of the recipes for the auto-
matic programmes in the "Rec-
ipe book".
again and again until
to set the SET+GO func-
and
1.
Touch
display.
2.
Use
MINDER. First you set the seconds,
then the minutes and the hours.
3.
Touch
starts automatically after five sec-
onds.
4. When the set time ends, an acoustic
signal sounds for two minutes and
00:00 and
5. Touch a sensor field or open the
with an
oven door to stop the acoustic sig-
nal.
7.7 Setting the Time delay
function
The DURATION
tions can be used at the same time, if
the oven is to be activated and deactiva-
ted automatically later. In this case, first
set the DURATION
function (refer to "Setting the DURA-
TION" and "Setting the END" ).
When the Time delay function is activa-
ted, the display shows a static symbol of
the oven function,
The dot shows which clock function is on
in the Clock / residual heat display.
There are three types of automatic
programmes:
• Automatic recipes
• Automatic programmes with weight
input
• Automatic programmes with the core
temperature sensor
ENGLISH
. and "00" flash in the
or to set the MINUTE
or the MINUTE MINDER
flash in the display.
and END
and then the END
with a dot and
13
func-
.