Heat Setting; Automatic Heat Up - AEG 49106IU-MN User Manual

10 www.aeg.com
Sensor field
5 The timer display
6
7
8
9
10
5.2 Heat setting display
Display
-
5.3 Activating and
deactivating the hob
Touch
hob. Touch
vate the hob.

5.4 Heat setting

Touch
Touch
The display shows the heat setting.
Touch
deactivate the cooking zone.

5.5 Automatic Heat Up

You can get a necessary heat setting in a
shorter time if you activate the Automat-
ic Heat Up function. This function sets
the highest heat setting for some time
/
/
The cooking zone is deactivated.
The cooking zone operates.
The STOP+GO / Keep warm function operates.
Not correct cookware or too small cookware or no
cookware on the cooking zone.
There is a malfunction.
A cooking zone is still hot (residual heat).
The Lock / The Child Safety Device operates.
The Power function operates.
The Automatic Heat Up function operates.
for 2 seconds to activate the
for 1 second to deacti-
to increase the heat setting.
to decrease the heat setting.
and at the same time to
Function
To show the time in minutes.
To increase or decrease the heat set-
ting.
To activate the Power function.
To increase or decrease the time.
To select the cooking zone.
To activate and deactivate the STOP
+GO function.
Description
(see the graphic), and then decreases to
the necessary heat setting.
To start the Automatic Heat Up function:
1.
Touch .
play.
2.
Touch again and again until
comes on in the display.
3.
Immediately touch
again until the necessary heat set-
ting comes on. After 3 seconds
comes on in the display.
To stop the function touch
comes on in the dis-
again and
.