Table of Contents
Advertisement
ERROR DECTECTION
Your Bighorn Bike is equipped with an error detection system integrated into the LCD display and motor controller. In the case of an electronic control
system fault an error code should display. The error codes are listed below and can help detect what the issue is on the bike. If your bike has an error
code displayed at any time it is recommended that you cease operation and contact your local dealer or Wattwheels.
0 Normal
2 Current error or MOS damaged
3 Motor stalling
4 Under voltage
5 Brake error (Start detection)
6 Hall error
7 Throttle error (Start detection)
9 Over voltage
A communication controller receiving error
WATTWHEELS LTD
18
Advertisement
Table of Contents
