Table of Contents
Advertisement
9. Error Code Indicator
If there is something wrong with the electronic control system, the
display will flash at 1 HZ and show the error code automatically.
Different error code is corresponding with different fault information,
please see the last page Error code table for details.
※ Display return to normal only after problem being fixed and
e-bike will not run before fixing the problem.
10. SET Operation
Hold the SET for 2 seconds and enter into the setting interface, then
Number 8 is lighting, the display will flash at 1 HZ. Click the SET
to cycle from 0 to 3 setting interface, press UP or DOWN to select
the wanted parameter, and hold the SET for 1 second to exit.
Address：6101 Long Dong Road,Pudong New Area Shanghai,China
Tel：+86 21 58970723-166
Fax：+86 21 58979066
www.dapumotors.com
page 9
Advertisement
Table of Contents
