Download
Share
Print this page
  1. Manuals
  2. Brands
  3. WattWheels Manuals
  4. Scooter
  5. SCOUT LS 2019
  6. Manual

WattWheels SCOUT LS 2019 Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
SCOUT LS ELECTRIC BIKE 2019 MANUAL
Welcome
First off, welcome to the Wattwheels family! We're so happy to have you on board! You've picked a
great model and, in this manual, we're going to break down the basics to make sure that your bike
remains in top shape and performs to the highest standard.
You're about to experience the ride of your life. In order to get you out and having fun as quickly and
as safely as possible please read the all the manual carefully, paying close attention to the safety
section.
Also, we highly recommend familiarizing yourself with local laws for e-bikes and the components of
the model that you have before your first ride.
Wattwheels assumes that all persons involved in: using, repairing, maintaining, cleaning, or
disposing of this or any Wattwheels product must have fully read and understood the content and
meaning of these operating instructions.
Additionally, Wattwheels claims no responsibility for any injury or damage resulting in improper use
of any electric bike.
READY TO GET STARTED? LETS RIDE!
USING THIS MANUAL
This manual contains details of the product, its equipment, and information on its operation and
maintenance. Read it carefully and familiarize yourself with the Scout before using it to ensure a safe
use and prevent tragic accidents. Be sure to retain this manual as your convenient Scout information
source.
This Manual contains many Warnings and Cautions concerning the safe operation and
consequences, if safe setup, operation and maintenance are not performed. All information in this
manual should be carefully reviewed and if you have any questions you should contact your local
retailer immediately.

Advertisement

loading

Related Manuals for WattWheels SCOUT LS 2019

Summary of Contents for WattWheels SCOUT LS 2019

  • Page 1 SCOUT LS ELECTRIC BIKE 2019 MANUAL Welcome First off, welcome to the Wattwheels family! We’re so happy to have you on board! You’ve picked a great model and, in this manual, we’re going to break down the basics to make sure that your bike remains in top shape and performs to the highest standard.
  • Page 2 Visit www.wattwheels.co.nz to download the latest version. Wattwheels makes every effort to ensure accuracy of its documentation and assumes no responsibility of liability if any errors or inaccuracies appear within. Assembly and first adjustment of your Scout Bike requires special tools and skills and it is recommended that this should be done by a trained bicycle mechanic if possible.
  • Page 3 LCD display and operation please refer to the manual included. This is also on located on our website at www.wattwheels.co.nz/manuals LIGHTS To activate the lights press down the up key on the keypad for three seconds. The display should light up and a little icon appear above the PAS level indicator.
  • Page 4 PAS (Pedal assist modes) Pedal assist modes start from 1 and go up to 5 in some cases. This can be changed if required. Refer to the Display manual. PAS level 1 is the first pedal assist level and will give you some slight assistance.
  • Page 5 FOLDING To fold the bike three step are required: – fold in the pedals. To do this hold the pedal and press inwards and then push down. - fold down the handlebars. Lift the little silver button and at the same tile pull the latch down to release.
  • Page 6 – Lift up the small black latch where the folding is located on the main frame . Then pull towards you the main black latch to unlock. When folding make sure the pedals are in roughly the same position as the photo EXPECTED RANGE Expected Range Operating Conditions...
  • Page 7 ADJUSTING THE SEAT HEIGHT Use the quick release lever to free the seat post and pull upwards or push downwards to reach desired height. Notice: Ensure seat post and seat are properly adjusted before riding. Do not raise the seat post beyond the minimum insertion marking etched into the seat post tube.
  • Page 8 Keep both the battery and charger out of the reach of children and If there appears to be an issue with the charger or battery, stop use immediately and contact either the manufacturer or Wattwheels at admin@wattwheels.co.nz CHARGING: •Firstly, insert plug of the charger into charging socket of the battery box.
  • Page 9 (document included) so any standard repairs please contact Wattwheels and we will arrange a service agent close to you to look at the bike. We carry spare parts so anything electrical that a standard bike shop doesn’t have we will ship to you.
  • Page 10 PARKING, STORAGE & TRANSPORT Please follow these basic parking, storage and transport tips to ensure your bike is well cared for on and off the road. o When pushing the vehicle manually, turn off the power to avoid accidental acceleration from the motor.
  • Page 11 SAFETY CHECK Safety Check Basic Steps o Ensure front and rear brakes work properly. o Ensure brake pads are not over worn and are correctly positioned in relation to the rims. 1. Brakes o Ensure brake control cables are lubricated, correctly adjusted and display no obvious wear.
  • Page 12 Wattwheels immediately. FINALLY, WE WOULD LIKE TO SAY THANKS AGAIN AND ENJOY YOUR NEW E-BIKE! AND PLEASE CONTACT YOUR LOCAL DEALER OR WATTWHEELS IF YOU HAVE ANY ISSUES OR QUESTIONS. “POWER TO THE PEOPL...
  • Page 13 Wattwheels, the component will be replaced during the warranty period. Wattwheels will have no obligation under this warranty in the event the product is damaged or destroyed as a result of any of the following events: components used on a non Wattwheels product, damage or destruction by abuse; collision; theft;...
  • Page 14 Unless otherwise provided, the sole remedy under the above warranty, or any implied warranty, is limited to the replacement of defective parts at the sole discretion of Wattwheels. In no event shall Wattwheels be responsible for direct, incidental or consequential damages, including, without limitation, damages for personal injury, property damage, or economic losses, whether based on contract, warranty, negligence, product liability, or any other theory.
  • Page 15 KING-METER USERS GUIDE SW-LCD SCOUT...
  • Page 16 About the User Manual Dear users, To ensure better performance of your e-bike, please read through the SWLCD product introduction carefully before using. We will use the most concise words to inform you of all the details（including the hardware installation, setting and normal operation use of the display）when using our display.

  • Page 17: Appearance And Size

    Appearance and Size Material and Color SW-LCD products are made of PC. Under the temperature of -20 to 60℃, the shell material can ensure normal usage and good mechanical performance. Real product and dimension figure (unit: mm)

  • Page 18: Function Summary And Button Definition

    Function Summary and Button Definition Function Summary SW-LCD provides a wide range of functions and indicators to fit the users’ needs. The indicated contents are as following. ◆Battery Indicator ◆Motor Power Ratio ◆Speed Display (including running speed, max speed and average speed) ◆Trip distance and total distance ◆Trip time display of single ◆Cruise control...

  • Page 19: Operation Cautions

    Button Definition SW-LCD has three buttons. They are . In is named as “MODE”. the following introduction, is named as “UP” and is named as “DOWN”. Operation Cautions Be care of the safety use. Don’t attempt to release the connector when battery is on power. Try to avoid hitting.

  • Page 20: Installation Instruction

    Installation Instruction Fix the display onto the handlebar and adjust to an appropriate visual angle. Tighten all the connectors. Normal Operation Power On/Off Hold Mode button for 2 seconds then the display will power on, and the display will the power on the controller. With display on, hold MODE to turn off power supply of the e-bike.
  • Page 21 Running Speed Average Speed Max Speed Trip Time Trip Distance Total Distance Push Cruise Control Hold DOWN for 2 seconds to enter the mode of power assistant walk. The e-bike will go on at a uniform speed of 6 Km/h. PUS shows on the screen. Push Cruise Control “Push Cruise Control”...
  • Page 22 Turn on/off Backlight Hold UP 2 seconds to turn on the backlight of the display, the headlight will be power on at the same time. Hold UP for 2 seconds again, backlight turned off. Turn On/Off Backlight PAS Level Selection Hold UP or DOWN to change the output power of the motor.
  • Page 23 Low Voltage Flash Battery Indicator Motor Power Monitor Motor power showed as below: Motor Output Power Error Code Information If there is something wrong with the electronic control system, the error code will appear automatically. Here is the detail information of the error code in Table 1 attached. Error Code Make the display repaired when error code appears.
  • Page 24 User Setting Preparation before Starting Make sure all connectors tightened and the cables without damage. General Setting Press MODE button to start the display, then hold both UP and DOWN for 2 seconds to enter the setting menu. Trip Distance and Trip Time Clearance TC means trip distance clearance.
  • Page 25 Backlight Contrast BL means backlight. Level 1 is the low brightness. Level 2 is the middle brightness. Level 3 is high brightness. The default level is 1. Bottom of the screen prompts SET2. Press UP or DOWN to modify the backlight brightness. Hold MODE to confirm the modification and exit the general setting.
  • Page 26 MODE 2 seconds again will enter power-on password enable/disable page. Press UP/DOWN to change the number .Press MODE to select digit one by one. After 4-digite of the correct password entered, press MODE to confirm then select password enable or disable. Password Entering Page Power-on Password Enable Press UP/DOWN to select Y or N, and press MODE to...
  • Page 27 Power-on Password Modify UP and DOWN is to change the number, and MODE is to select digit one by one, finally to hold MODE to confirm the modification. Password Modify Page Normal Parameter Setting Hold both UP and DOWN for 2 seconds to enter User setting .But hold both DOWN and MODE over 2 seconds is to enter password 0512 to modify the wheel size.
  • Page 28 Press UP and DOWN to select the correct value to match the wheel diameter. Selectable values include: 16, 18, 20, 22, 24, 26, 700C, 28, 29. Default diameter is 26 inch. Ld means Wheel Diameter. Wheel Diameter Setting Page Speed-limit Setting When the running speed is faster than MAX SPEED, the controller will cut off the motor power.
  • Page 29 Personalized Parameter Setting Personalized Parameter Setting can match variety requirements in use. Settings items are : Battery Power Bar Setting, Pedal assistant level Setting, Over-current Cut , Pedal Assistant Sensor Setting, Speed Sensor Setting and Delay Time Setting. For the details, please see the Attached List 2.
  • Page 30 Option Select Page Battery Power Bar Setting Each bar represents a voltage value. 5 voltage values MUST BE entered one by one. Press MODE to confirm and UP/DOWN to select the value. VOL = voltage Battery Power Bar Setting Pedal Assistant Level Setting Pedal Assistant Level Select...
  • Page 31 In Pedal Assistant Level Setting , there are 8 modes to select ：0-3, 1-3, 0-5, 1-5, 0-7, 1-7, 0-9, 1-9. Press UP/DOWN to select the mode, and press MODE to confirm, then change the ratio of each PAS level. PAS Mode Select Page 0-3 or 1-3: PAS1 also shows ECO, PAS2 also shows TOUR,...
  • Page 32 PAS Ratio Modify To modify the value of PAS ratio will meet the different requirements. Take the 1 level for example, “45-55 percent” is the range value, bottom value can be modified, and the default is 50 percent. MODE is used to confirm and turn to the next PAS ratio setting.
  • Page 33 CUR Setting Page Pedal Assistant Sensor Setting The Direction of Pedal Assistant Sensor Setting PAS means Pedal Assistant System. “run-F” means forward direction, while “run-b” means back direction. Press UP/DOWN to select F or b, and press MODE to confirm and turn to PAS sensitivity setting.
  • Page 34 The Sensitivity of PAS Setting Proportion parameters Setting Of PAS N means the proportion parameter of PAS. Press UP/DOWN to select the parameter, the more power, the more PAS feeling. Proportion parameter of PAS Speed Sensor Selection SPS means Speed Sensor. Press UP/DOWN to select the quantity of magnet head (the range is from 1 to 9), and press MODE to confirm and turn to Throttle Definition page.
  • Page 35 The standard speed limit setting is based on this setting, not more than this setting value. This setting is the priority version Interface of max speed limited setting Button PAS Setting PUS means pushing. Press UP/DOWN to choose Y/N. Short press MODE, Y means enable, N means disable. Short press MODE to confirm and enter into PAS speed setting.
  • Page 36 The scope is “20%-35%”by pressing UP/DOWN, short press MODE to enter into slowly start up. Default value is 25%. Interface of PAS speed setting Slowly Start up Setting SSP means slowly start up. The scope is 1-4, 4 means the slowest. Press UP/DOWN to choose. Long press MODE to confirm and exit setting.
  • Page 37 Exit setting In the setting state, short press MODE (less than 2s) is to confirm the input. Long press MODE (more than 2s) is for saving the setting, then quit the setting state. Long press DOWN (more than 2s), is to cancel the operating but not saving setting data.
  • Page 38 passwords, short press MODE to confirm. The interface is as below. When display showed DEF:00, it means recovering default state, then exiting. In the recovery default, battery power, ODO and trip cannot be recovered, but starting up password can be recovered. Input recovery password interface Start Complete...
  • Page 39 Q: Why the display is not able to start up? A: Check the connector between display and controller. Q: How to deal with the error code? A: Fix it to the maintenance place immediately. Barcode The barcode is built up as follows: SW-LCD=Name 000001=Sequence No.

  • Page 40: Quality Assurance And Warranty Scope

    Quality assurance and warranty scope Ⅰ、Warranty 1 、 Any quality problems in normal case and during guarantee period, our company will be responsible for the warranty. 2、The warranty time is 24 months when display out of the factory. Ⅱ、Other items The following items do not belong to our warranty scope.

  • Page 41: Connection Layout

    Connection layout Connector line sequence Display-side Connector Display-side adapter Switch wiring Line sequence table Line sequence Color Function Red（VCC） Blue(K) Lock Black(GND) Green(RX) Yellow(TX) Some wire use the water-proof connector, users are not able to see the inside color.

  • Page 42: Version Changes

    Version changes This operating instruction is a general-purpose version （V1.0） . Some of the version for the display software will be different from the specification, which should depend on the actual use version.
  • Page 43 Attached list 1：Error code definition Error Code Definition Current Abnormality Throttle Abnormality Motor Abnormality Motor Hall Signal Abnormality Brake Abnormality Communication Abnormality Attached list 2： Password table Password Setting Using parameter setting 0512 password(settled) Default Starting up password 1234 Personality setting 2962 password(settled) Recovery setting...
  • Page 44 Attached list 3：Personality Parameter setting Setting Display Details Five battery power value Battery power Power assist level option Assistance Assistance proportion Limit current Current-limiting PAS direction PAS sensitivity Power assist sensor PAS magnet No Speed sensor magnet No Speed sensor Throttle-changing Throttle Throttle...
  • Page 45 Continue list 3： Items Display Setting Time of battery power delay System setting Max speed Attached list 4：Power assist table Level Level Item 0-3/ 1-3 — — — — — — 0-5/ 1-5 — — — — 0-7/ 1-7 — —...
  • Page 46 Attached list 5：symbol definition Symbol Definition Setting Password Power delayed time Recover default Trip and time to clear Backlight Throttle-changing Throttle power assist walk Speed limit Wheel diameter Question mark Backward Forward...
  • Page 47 KING-METER...