SATA (Serial ATA) Connectors
Features
•
2 Serial ATA 3.0 ports with data transfer rate up to 6Gb/s
•
Integrated Advanced Host Controller Interface (AHCI) controller
•
Supports RAID 0/1/5
The Serial ATA connectors are used to connect Serial ATA devices. Connect one end of the Se-
rial ATA data cable to a SATA connector and the other end to your Serial ATA device.
BIOS Setting
Configure the Serial ATA drives in the Advanced menu ("SATA Configuration" submenu) of the
BIOS. Refer to chapter 3 for more information.
Chapter 2 Hardware Installation
Chapter 2
SATA 0
7
1
SATA 1
SATA 3.0 6Gb/s
SATA (Serial ATA) Power Connectors
These SATA power connectors supply power to the SATA drive. Connect one end of the pro-
vided power cable to the SATA power connector and the other end to your storage device.
20
4
SATA
5V
Power 0
Ground
Ground
SATA
+12V
Power 1
1
www.dfi .com