Usb Ports - DFI KU173 User Manual

USB Ports

USB 3.0
USB 2
USB 1
USB 4
USB 3
USB 3.0
USB 2.0
The USB device allows data exchange between your computer and a wide range of simultane-
ously accessible external Plug and Play peripherals.
The system board is equipped with four onboard USB 3.0 ports (USB 1-2/3-4). The 10-pin
connectors allow you to connect 4 additional USB 2.0 ports (USB 6-7/8-9). The additional USB
ports may be mounted on a card-edge bracket. Install the card-edge bracket to an available
slot at the rear of the system chassis and then insert the USB port cables to a connector.
Chapter 2 Hardware Installation
Chapter 2
USB 6-7 USB 8-9
2
10
1
BIOS Setting
Configure the onboard USB in the Advanced menu ("USB Configuration" submenu) of the
BIOS. Refer to chapter 3 for more information.
Driver Installation
You may need to install the proper drivers in your operating system to use the USB device.
Refer to your operating system's manual or documentation for more information.
Wake-On-USB Keyboard/Mouse
The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or USB mouse
to wake up a system from the S3 (STR - Suspend To RAM) state.
18
www.dfi .com