Graphics Interfaces; Rj45 Lan Ports - DFI KU173 User Manual

Graphics Interfaces

The display ports consist of the following:
• 2 DP++ ports
DP++ 1
DP++ 1 DP++ 2
DP++ 2
DP++ Port
The DP++ port is a digital display interface used to connect a display device such as a com-
puter monitor. It is used to transmit audio and video simultaneously. The interface, which is
developed by VESA, delivers higher performance features than any other digital interface.
BIOS Setting
Configure the display devices in the Advanced menu ("Video Configuration" submenu) of the
BIOS. Refer to chapter 3 for more information.
Driver Installation
Install the graphics driver. Refer to chapter 4 for more information.
Chapter 2 Hardware Installation
Chapter 2

RJ45 LAN Ports

LAN 1 LAN 2
LAN 1
LAN 2
Features
• Intel I210AT PCIe (10/100/1000Mbps)
®
• Intel I219LM PCIe with iAMT11.6 (10/100/1000Mbps) (only Core i7/i5 supports iAMT)
®
The LAN ports allow the system board to connect to a local area network by means of a net-
work hub.
BIOS Setting
Configure the onboard LAN ports in the Advanced menu ("ACPI Configuration" submenu) of
the BIOS. Refer to chapter 3 for more information.
Driver Installation
Install the LAN drivers. Refer to chapter 4 for more information.
17
www.dfi .com