Save & Exit; Updating The Bios - DFI SD330 User Manual

Exit
InsydeH20 Setup Utility
Main Advanced Security Boot
Exit Saving Changes
Load Optimal Defaults
Discard Changes
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter
Exit Saving Changes
Select this field and then press <Enter> to exit the system setup and save your
changes.
Load Optimal Defaults
Select this field and then press <Enter> to load optimal defaults.
Discard Changes
Select this field and then press <Enter>to exit the system setup without saving your
changes.
Chapter 3 BIOS Setup
Rev. 5.0
Exit
Exit system setup and save
your changes.
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Chapter 3

Updating the BIOS

To update the BIOS, you will need the new BIOS file and a flash utility. Please contact techni-
cal support or your sales representative for the files and specific instructions about how to
update BIOS with the flash utility.
When you download the given BIOS file, you may find a BIOS flash utility attached with the
BIOS file. This is the utility for performing BIOS updating procedure. For your convenience, we
will also provide you with an auto-execution file in the BIOS file downloaded. This auto-execu-
tion file will bring you directly to the flash utility menu soon after system boots up and finishes
running the boot files in your boot disk.
R
Read file successfully. (path= "platform.ini")
Insyde H20FFT (Flash Firmware Tool) Version (SEG) 100.00.08.10
Copyright(c) 2012 - 2016, Insyde Software Corp. All Rights Reserved.
Current BIOS Model name: SD330-Q170
New BIOS Model name: SD330-Q170
Current BIOS version: 65.05A
New BIOS version: 65.05A
0%
C:\SD330-Q170>_
42
Information
Please do not remove the AC power
Initializing
Updating Block at FFFFF000h
25% 50% 75% 100%
100%
www.dfi.com