Audio - DFI SD330 User Manual

Wake-On-USB Keyboard/Mouse
The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or USB mouse
to wake up a system from the S3 (STR - Suspend To RAM) state. To use this function:
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB ports, the
+5V_standby power source of your power supply must support ≥1.5A. For 3 or more
USB ports, the +5V_standby power source of your power supply must support ≥2A.
Chapter 2 Hardware Installation
Chapter 2

Audio

Rear Audio
Line-out
Mic-in
Rear Audio
The system board is equipped with 2 audio jacks. A jack is a one-hole connecting interface for
inserting a plug.
• Line-out Jack (Lime)
This jack is used to connect a headphone or external speakers.
• Mic-in (Pink)
This jack is used to connect an external microphone.
Driver Installation
Install the audio driver. Refer to the chapter 4 for more information.
21
1
www.dfi.com