Figure 22 - Creating A New Connection In Windows Xp - red lion BT-6821-AT-AC User Manual

12.6 Dial-Up Networking in Windows
This appendix shows how to create a dial-up networking session to access the Internet/cellular network when connected
to the modem using a serial cable. Although these instructions are written for computers running Microsoft Windows
XP, this procedure should be similar with other versions of Microsoft Windows.
12.6.1 Installing the modem driver
1) Click Start > Run, type control modem.cpl and then click OK to open the Phone and Modem Options panel
2) Click the Modems tab and then click Add
3) You may be required to enter location information if this is the first modem installed. If this is the case, choose
your region and area code in the information window.
4) Check the box labeled Don't detect my modem... and then click Next
5) Select Standard 33600 bps Modem from the list and click Next
6) Select the COM port that the modem is attached to then click Next
7) Click Finish to complete the driver installation
12.6.2 Creating a Dial-Up Networking session
1) Click Start > Run, type control ncpa.cpl and then click OK to open the Network Connections panel.
2) Click on File > New Connection (as per the screenshot above)
3) The New Connection Wizard welcome dialogue will appear. Click Next.
4) The Network Connection Type dialogue will appear. Select Connect to the Internet and click Next.
Figure 22 – Creating a new connection in Windows XP