Table of Contents
Advertisement
9.3
Analog Input value query
The modem has a 10-bit Analog to Digital Converter (ADC) which allows it to monitor all of its general purpose analog
input(s) for a change in state, along with the dedicated power input. The value of these inputs can be queried by sending
the following command:
AT+BAIGET?
Sample response from modem (the actual output depends on the modem model):
+BAIGET: PWR,13.553
+BAIGET: AI1,3.056
+BAIGET: AI2,1.987
+BAIGET: AI3,0.000
Advertisement
Table of Contents
Troubleshooting
