Configuring Wep - D-Link DHP-W310 User Manual

Section 3 - Configuration
It is recommended to enable encryption on your wireless DHP-W310AV before your wireless network adapters. Please establish wireless connectivity
before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based configuration by opening a web
browser and entering http://dlinkapWXYZ.local. (on the Wi-
Fi Configuration Card) or the IP address of the DHP-W310AV
(192.168.0.50). Click on Setup and then click Wireless
Settings on the left side.
2. Next to Security Mode in the Wireless Security Mode section,
select WEP Mode.
3. Next to WEP Encryption, select 64-bit or 128-bit encryption.
4. Next to WEP Key 1, enter a WEP key that you create. Make sure
you enter this key exactly on all your wireless devices.
5. Next to Authentication, select Both or Shared Key.
D-Link DHP-W310AV User Manual

Configuring WEP

36