Wireless Settings - D-Link DHP-W310 User Manual

Section 3 - Configuration
The DHP-W310AV lets you customize your wireless settings for your access point. This device allows you to extend your current network so you can
roam about the house while staying connected the entire time.
Wireless Network Service Set Identifier (SSID) is the name
Name: of your wireless network. Create a name
using up to 32 characters. The SSID is case-
sensitive.
Enable Auto The Auto Channel Scan setting can be
Channel Scan: selected to allow the DHP-W310 to choose
the channel with the least amount of
interference.
Wireless Channel: By default the channel is set to 1. The
Channel can be changed to fit the channel
setting for an existing wireless network or
to customize the wireless network. If you
enable Auto Channel Selection, this option
will be greyed out.
Wireless Security & WPA/WPA2 is more secure than WEP. WEP
WPA: should only be used if you have older
devices that are unable to use WPA. Use of
TKIP/AES security framework provides the
optimum mix of security and compatibility.
Please refer to "Wireless Security" on page 34
for more information.
Password: Choose a password that is strong. A good password uses both letters and numbers in unpredictable places. Example bad
passwords could be password or 12345678.
D-Link DHP-W310AV User Manual

Wireless Settings

16