Table 4-5 Internet Access Setup Menu Fields - ZyXEL Communications Prestige 681 User Manual

Table 4-5
Field
ISP Name
2
Encapsulation
DLCI
My Login
My Password
Single User Account
IP Address
At this point, if all your settings are correct your Prestige should connect automatically to the Internet. If the
connection fails, note the error message that you receive on the screen and take the appropriate
troubleshooting steps.
2
Note: You must reboot the Prestige when you change the Encapsulation method in Menu 4 or Menu 11.
Internet Access
Prestige 681 SDSL Router
Internet Access Setup Menu Fields
Description
Enter the name of your Internet Service Provider,
e.g., myISP. This information is for identification
purposes only.
Press the [Spacebar] to select the method of
encapsulation used by your ISP. DLCI is N/A for
PPP encapsulation. Please see section 4.6 for
more information.
Enter the DLCI (Data Link Connection Identifier)
that the carrier gave you. The default DLCI for the
P681 is 16, using RFC 1490 encapsulation. See
section 4.7 for more information.
Enter the login name that your ISP gives you.
Enter the password associated with the login
name above.
Press the spacebar to enable or disable SUA.
Please see the following section for a more
detailed discussion on the Single User Account
feature.
Enter the IP address supplied by your ISP if
applicable i.e., if you enabled SUA. See
Single User Account Menu Fields
more information in this case.
Options/E.G.
e.g., MyISP
RFC 1490
PPP
e.g., 16
e.g., kitty
********
Yes/No
e.g., 192.168.1.100
Table 4-6
for
4-11
PPP
CMN 1483
CMN 1490
RFC 1490