Frame Relay Options; Figure 3-4 Menu 2 - Wan Setup - ZyXEL Communications Prestige 681 User Manual

Prestige 681 SDSL Router
If you are unsure of any of this information, please check with your telephone company. Enter 2 from the
main menu to open Menu 2 – WAN Setup.
The following table describes the fields in this menu.
Field
Service Type=
Link Compatibility=
Transfer Rate=
Edit Frame Relay
Options=

3.2.1 Frame Relay Options

Press the spacebar to toggle the default No to Yes in the Edit Frame Relay Options= field in Figure 3-4
to display Menu 2.1 - Frame Relay Options.
3-6
Menu 2 - Wan Setup
Service Type= Client
Link Compatibility= Ascend/Lucent
Transfer Rate= 2320K
Edit Frame Relay Options= No
Press ENTER to Confirm or ESC to Cancel:
Figure 3-4 Menu 2 – WAN Setup
Table 3-4 Menu 2 – WAN Setup Fields
Description
Choose Server if your P681 is acting as a SDSL
server and Client if it is acting as a client. Press the
[SPACEBAR] to toggle between choices and then
press [ENTER] to select.
Press the [SPACEBAR] to select either
Ascend/Lucent or Copper Mountain.
Press the [SPACEBAR] to step through the
transmission speed options and then press [ENTER] to
select the matching transmission speed of the peer.
Press the [SPACEBAR] to change No to Yes, then
press [ENTER] to go to Menu 2.1 – Edit Frame Relay
Options (see the next section).
Option
Server
Client
Ascend/Lucent
Copper Mountain
e.g.,
784K
No
Yes
WAN Setup