Upload Firmware; Figure 11-14 Successful Backup - ZyXEL Communications Prestige 681 User Manual

Prestige 681 SDSL Router
Step 4. Enter where the rom configuration file is on your computer, and make sure you choose the X-
Modem Protocol. Then press "Send".
Step 5. After a successful restoration you will see the following screen. Press any key to return to reboot
the system.
Save to ROM
Hit any key to start system reboot.
Keep in mind that the configuration is stored in the flash ROM in the Prestige, so even if power failure
should occur, your configuration is safe.

11.6 Upload Firmware

Menu 24.7 -- System Maintenance - Upload Firmware allows you to upgrade the firmware and the
configuration file via the console port. The firmware and configuration file may also be uploaded via FTP.
There are 2 components in the system: the router firmware and the configuration file, as shown in the next
figure. Restoring the configuration as in menu 24.6 copies your (customized) backup configuration from
your computer to the Prestige. Note you must be able to access the SMT to do this. Uploading the
configuration file via menu 24.7.2 on the other hand rewrites all configuration data, as well as system-
related data, the error log and the trace log. If you forget your password for instance (see section 2.9.1) you
will need to use menu 24.7.2 as you can use this method in debug mode. However, your customized settings
will be reset to the default values (including your password being reset to 1234, the Prestige default
password).
11-12
Enter where the rom
configuration file is on your
computer.
Figure 11-13 HyperTerminal Screen
Figure 11-14 Successful Backup
Choose the
X-Modem
Protocol.
System Maintenance