DFI G7G330-B User Manual page 38

2
Hardware Installation
2.5.5 IEEE 1394 (optional on G7G330-B)
1394_1
9
1
1394_2
2
1 0
The system board is equipped with an onboard IEEE 1394 port at
location CN1 (IEEE 1394_1).
It is also equipped with an IEEE 1394 connector at location J1
(1394_2) for connecting an additional 1394 port. The 1394 port
may be mounted on a card-edge bracket. Install the card-edge
bracket to the system chassis then connect the cable connector to
the 1394 connector on the system board. Make sure pin 1 of the
cable connector is aligned with pin 1 of the J1.
38