DFI G7S300-B User Manual page 80

3
BIOS Setup
Run VGABIOS if S3 Resume
When this field is set to Auto, the system will initialize the VGA BIOS
when it wakes up from the S3 state. This can be configured only if
the "ACPI Suspend Type" field is set to "S3(STR)".
Power Management
This field allows you to select the type (or degree) of power saving
by changing the length of idle time that elapses before the "Suspend
Mode" field is activated.
Min Saving
Max Saving
User Define
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank This will cause the system to turn off the ver-
Blank Screen
DPMS Support Initializes display power management signaling. Se-
Video Off In Suspend
This field is used to activate the video off feature when the system
enters the Suspend mode.
Suspend Type
The options are Stop Grant and PwrOn Suspend.
MODEM Use IRQ
This field is used to set an IRQ channel for the modem installed in
your system.
80
Minimum power saving time for Suspend mode = 1
hr.
Maximum power saving time for Suspend mode =
1 min.
Allows you to set the power saving time in the
"Suspend Mode" field.
tical and horizontal synchronization ports and
write blanks to the video buffer.
This only writes blanks to the video buffer.
lect this if your video board supports it.