DFI G7S300-B User Manual page 41

2
Hardware Installation
S/PDIF Connector
Parallel
SPDIF out
Key
GND
+5V
SPDIF in
1 5
The system board is equipped with a S/PDIF connector. One card-
edge bracket, mounted with S/PDIF ports, may be provided with
the system board. Install the card-edge bracket to an available slot
at the rear of the system chassis then connect the audio cable con-
nector to J6. Make sure pin 1 of the audio cable connector is aligned
with pin 1 of J6.
41