Table of Contents
Advertisement
1
Introduction
S/PDIF
having to be converted first to an analog format. This prevents the
quality of the audio signal from degrading whenever it is converted
to analog. S/PDIF is usually found on digital audio equipment such as
a DAT machine or audio processing device. The S/PDIF connector on
the system board sends surround sound and 3D audio signal out-
puts to amplifiers and speakers and to digital recording devices like
CD recorders.
SERIAL ATA
1.5Gbps, it improves hard drive performance faster than the stand-
ard parallel ATA whose data transfer rate is 100MB/s.
gigabit lan
pipeline to access system memory for texturing, z-buffering and alpha
blending. The AGP slot supports AGP 8x (0.8V) with up to 2.13GB/
sec. bandwidth and AGP 4x (1.5V) with up to 1066MB/sec. band-
width for 3D graphics applications. It handles large amounts of
graphics data with the following features:
• Pipelined memory read and write operations that hide
• Demultiplexing of address and data on the bus for nearly
AGP in this system board will deliver faster and better graphics to
your PC.
12
S/PDIF is a standard audio file transfer format that
transfers digital audio signals to a device without
Serial ATA is a storage interface that is compliant
with SATA 1.0 specification. With speed of up to
The Realtek RTL8110SC PCI Gigabit LAN con-
troller support up to 1Gbps data transmission.
AGP is an interface designed to support high per-
AGP
formance 3D graphics cards. It utilizes a dedicated
memory access latency.
100 percent efficiency.
Advertisement
Table of Contents
