DFI G7S300-B User Manual page 71

Integrated Peripherals
OnChip IDE Device
Onboard Device
Super IO Device
↑↓→←
: Move
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
OnChip IDE Device
Move the cursor to this field and press <Enter>. The following
screen will appear.
IDE HDD Block Mode
IDE DMA Transfer Access
On-Chip Primary PCI IDE
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
On-Chip Secondary PCI IDE
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
On-Chip Serial ATA Setting
***
On-Chip Serial ATA
Serial ATA Port0 Mode
Serial ATA Port1 Mode
↑↓→←
: Move
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
Press Enter
Press Enter
Press Enter
Enter: Select +/-/PU/PD: Value
F6: Fail-Safe Defaults
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Device
Enabled
Enabled
Enabled
Auto
Auto
Auto
Auto
Enabled
Auto
Auto
Auto
Auto
***
Auto
Primary Master
Primary Master
Enter: Select +/-/PU/PD: Value
F6: Fail-Safe Defaults
BIOS Setup
Item Help
Menu Level
F10: Save ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level
If your IDE hard drive
supports block mode
Select Enabled for
automatic detection of
the optimal number of
block read/writes per
sector the drive can
support
F10: Save ESC: Exit F1: General Help
F7: Optimized Defaults
3
71