Outputting Data To The Com Port - Nikon HQA46480 Instruction Manual

4 Applications
To record the point, press
When recording sideshots, stakeout records and
control shots from the Rept function, you can choose to
store raw data only, XYZ data only, or both. For more
information, see
If HA or VA is moved after you take a measurement but before you press [ENT], the angle recorded is the angle
shown when [ENT] is pressed.
In an angle-only record, SD is always recorded as 0.0000.
If the point name that you want to record already exists in the job, an error
message appears. Depending on the type of existing record, you can
overwrite the old record with the new data. For more information, see
Recording Data, page 167.
Hold down
measurement as a CP record.

Outputting data to the COM port

If you press
observation screen, a line of data is output to the COM
port.
Note – If
The format of the output data is defined by the setting
of the Ext.Comm field in
Comm
page
To output data on the COM port when you press [ENT], set the Data Rec field in
MENU > Settings > Rec to COM. For more information, see
Recording, page 108.
7 8 Total Station DTM-322 Instruction Manual
[ENT]
Recording, page
for one second to record the
[ENT]
while the
[ENT]
appears, data is not stored to the job when you press
[COM]
MENU > Settings >
. For more information, see
107.
on the last field.
108.
icon appears in an
[COM]
Communications,
.
[ENT]