Zoom ADSL X5 User Manual page 23

3 3 3 3
Enter the appropriate information on the WAN
Configuration page. Use the table below as a guide.
For this setting...
Current
Connection
Encapsulation
VPI and VCI
Bridge and IGMP
IP Address and
Subnet Mask
Use DHCP
Default Route
Gateway IP
Address
Use DNS
Primary DNS
Server
Secondary DNS
Server
4 4 4 4
Click Save Changes on the WAN Configuration page.
5 5 5 5
You are redirected automatically to the Basic Setup page.
Click Write Settings to Flash.
Chapter 1: Installation Instructions
Do this...
Select Enabled from the drop-down list.
(That is, click the arrowhead
far right of the box to view the items in
the list, then select Enabled.)
Select your service provider's
Encapsulation setting from the
drop-down list.
Enter the VPI and VCI settings for your
service provider. (If you do not know
these settings, refer to the ADSL
Internet Settings Tables on page 45.)
Ensure that Disabled is selected from
both drop-down lists.
Enter the values assigned to you by your
service provider for each.
Ensure that the Disabled option button is
selected.
Ensure that Enabled is selected from the
drop-down list.
Enter the value assigned to you by your
service provider.
Ensure that the Disabled option button is
selected.
Enter the value assigned to you by your
service provider.
If your service provider gave you a
second DNS server address, enter it.
at the
23