Setting A Wait Time For Connecting To A Network - Canon MF211 Manual

Setting a Wait Time for Connecting to a Network

When a network is designed to enjoy redundant connectivity with multiple switching hubs or bridges, it must have a mechanism to
prevent packets from looping. One effective solution is to define the role of each switch port. However, communication may still be
disrupted for several tens of seconds immediately after you change the way that network devices are connected, or if you add a new
device. If this type of problem occurs, set a wait time for connecting to the network.
1
Press .
2
Use / to select <Network Settings>, and press
If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and press
Manager PIN
3
Select <Waiting Time for Connection at Startup>, and press
4
Enter the wait time in seconds, and press
Use / or the numeric keys to enter the time.
5
Press .
LINKS
Configuring Ethernet Settings
Changing the Maximum Transmission Unit
.
.
.
0L40-05W
. Setting the System