4. Connect Earphone
Ear
Speaker
Using The Earphone/Neck Loop Lanyard
Connect the Listen Intelligent ear
phone/neck loop lanyard to the
two 3.5 mm output jacks on the
unit. Then connect the short cable
ear speaker or headphones to
Ear Phone/
the 3.5mm output jack on the
Neck Loop
lanyard. The lanyard neck loop
Lanyard
is placed over the head and
Headset
worn as a necklace.
This is the preferred method of
wearing the receiver for best
performance!
For T-coil compatible hearing aid
use simply disconnect the ear
speaker or headset from the ear
phone/neck loop lanyard.
Earbuds
Using The 3.5mm Earphone Extension Cable
If the receiver is to be clipped to a belt, waistband or inside a pocket a long extension cable is used.
Connect the extension cable to the ear speaker, headset or earphones, then connect the extension cable
into one of the 3.5 mm output jacks on top of the receiver.
Ear
Speaker
Headset
Extension
Cable
Earbuds
l
L R - 5 2 0 0 R E C E I V E R M A N U A L
PAGE 8