Accessing Battery Compartment; Reset To Factory Default Settings - Listen LR-5200-072 User Manual

Accessing Battery Compartment

To access the battery compartment simply remove the belt clip and by pulling down and out on the
battery door locking tab. Note: The product labeling information can be found behind the battery and includes
the product model number, description, serial number, contact information and compliance statement.

Reset to Factory Default Settings

The unit can be returned to its factory default settings at any time by following steps:
1. Turn the unit off
2. Press and hold down the volume down button while pressing and holding the power button
for 1 second to turn the unit on
3. Continue to hold down the volume down button while the unit powers on. The OLED display
will show the Unit #, Charge Level %, Channel Selection and end with "Reset?"
4. Release the volume down button when Reset is displayed on the OLED display.
5. Press the power button to confirm default is desired. Once pressed the unit will display
"Defaulted" on the OLED display. The unit has now returned to the factory default state
6. If 5 seconds lapses before the power button is the pressed, the unit will time out and the unit
will not reset to the factory default settings
Battery door
Door
locking
tab
L R - 5 2 0 0 R E C E I V E R M A N U A L
l
PAGE 16