Table of Contents
Advertisement
LR-5200 Quick Reference
1. OLED Display Area
2. Micro USB
1. OLED Display Area: Displays battery status, unit ID, channel status, volume status and charge activation
2. Micro USB: USB charging, programming, firmware updates and inventory dispensing
3. Up/Down Volume Control: Press momentarily to adjust the volume up/down or press and hold to ramp
the volume.
Note: Press and hold both up and down buttons for 5 seconds to activate channel select, use up and down to
change the channel. Press power to save and exit
4. Programmable Channel Select: Cycle through active channels, seek to or lock to a channel.
5. 3.5 mm Output Jacks
6. Belt Clip
7. Charging Contact
5.
3.5 mm Output Jacks: Connect Listen Ear Phone/Neck Loop Lanyard for use with T coil hearing aids
or with Universal Ear Speaker or Headphone.
6.
Belt Clip: To remove, remove screw and pull belt clip from unit. To install place belt clip in place and
insert screw.
7.
Charging Contact: For use with Listen charging tray options.
8.
Power On/Off: Press and hold for 1 second to turn on. Press and hold for 3 seconds to turn off.
9.
LED: Indicates low battery condition and charging status
10. Battery Protective Pull Tab: Remove clear plastic pull tab to activate internal battery connections.
11. Battery Door: Can be removed to access battery and product labeling information.
3. Up/Down
Volume Control
4. Programmable
Channel Select
8. Power On/Off
9. LED
10. Battery
Protective Pull Tab
11. Battery Door
L R - 5 2 0 0 R E C E I V E R M A N U A L
l
PAGE 4
Advertisement
Table of Contents
