Table of Contents
Advertisement
5. Turn the Unit On
Press and hold the Power Button for 1 second to turn the receiver on, the unit display will show the unit
ID, battery status and the current channel. Each item will be displayed and then the display will turn off.
OLED Display:
Indicates Unit #,
Charge %
and Channel
Assignment
when power
button is pressed
To view the unit ID, battery status or channel while the unit is powered, momentarily press the power
button. To turn the receiver off, press and hold the power button for 3 seconds.
6. Programmable Channel Select (Listen Button)
The main advantage of the LR-5200 Receiver is the functionality of the programmable Listen Button.
The Listen Button can be programmed for Channel Select Mode, Seek Mode or be Disabled. These
modes can only be change via the IDSP Software Suite.
Note: In order for the LR-5200 to receive audio it must be on the same channel as a transmitter in
the facility. 72 MHz receivers operate on 17 wide band channels and 40 narrow band channels. Channels
represented by letters on the display (i.e. A) are wideband channels; channels represented by numbers
are narrowband channels. Listen recommends the use of wide band channels for a much higher quality
listening experience.
216 MHz receivers operate on 19 wide band
channels and 38 narrow band channels.
Channel numbers starting with a "2" are wide
band; channels beginning with a "1" or "3"
are narrow band channels.
It is important to choose channels that are free
from interference to achieve proper operation
of your Listen equipment. This process is trial and
error. Before turning on the transmitter, listen for
interference on the available channels. Choose
channels with the least amount of interference. If
you are using multiple channels follow this process:
l
PAGE 9
L R - 5 2 0 0 R E C E I V E R M A N U A L
#123
Power Button:
Press and hold for
1 second to turn
on, press and hold
for 3 seconds to
turn off
1. Channel Select:
CH E
(Listen Button)
Advertisement
Table of Contents
