Table of Contents
Advertisement
Battery & Belt Clip
Low Battery Indication
When the unit detects a low battery condition it will cause the status LED to flash slowly indicating that the
unit needs to be charged. When the light begins to flash the unit has approximately 30 minutes of receiver
use before the unit will turn off. Press and release the power button and the battery charge % will be
displayed on the OLED screen temporarily.
Status LED:
Begins to flash
when receiver
has less than an
estimated 30
minute use left
on the charge
Belt Clip Installation/Removal
To remove belt clip, remove screw and pull belt clip from unit. To install place belt clip in place and
insert screw.
Belt Clip Screw:
l
PAGE 15
L R - 5 2 0 0 R E C E I V E R M A N U A L
OLED Display:
Press the Power
button to get the
status of
the battery
charge life
OLED Indicates a
% of charge
100%
Advertisement
Table of Contents
