Turning The Power On; Setting The Volume - Yamaha Clavinova CLP-120 Owner's Manual

Turning the Power On

1. Connect the power cord.
Insert the plugs at the ends of the cord, one into the AC INLET on the Clavinova, and the other into a standard AC
outlet.
In some areas, a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area.
1
2. Turn the power on.
Press the [POWER] button.
• The display located in the center of the front panel and the power indicator located below the left end of the key-
board lights up.
When you're ready to turn off the power, press the
• The display and the power indicator turn off.
TIP Power indicator
If you close the key cover without turning the power off, the power indicator remains lit, indicating that the
power is still on.

Setting the Volume

Initially set the
[MASTER VOLUME]
playing, re-adjust the [MASTER VOLUME]
The level decreases.
CAUTION
Do not use the Clavinova at a high volume level for a long period of time, or your hearing may be damaged.
TERMINOLOGY MASTER VOLUME:
The volume level of the entire keyboard sound
You can also adjust the [PHONES] output level and the AUX IN input level using the [MASTER VOLUME] slider.
TIP
(bottom surface)
[POWER]
Power indicator
[POWER]
control about halfway between the "MIN" and "MAX" settings. Then, when you start
control to the most comfortable listening level.
MIN
MASTER VOLUME
2
(The shape of plug differs depending on locale.)
Normally indicates tempo.
button again.
MAX
The level increases.
CLP-130/120
Display
Before Using the Clavinova 11